Roland Clan Forums

wrong forum here! ask your question in the forum "Fantom-0"!

foro equivocado aquí! haga su pregunta en el foro "Fantom-0"!

Candy

Is there an app to play Sounds wireless (!) with my FA into my iPad (this is connected with a Tascam Model 12-Mixer and the PA)? Until IOS11 this was possible with the Roland Air Recorder, but this app isn't available for IOS12 and higher. Is there something similar on the market? Or is there a soft...

I use the Roland Juno Bag (Gig Bag for Juno-Di, Juno D and Juno-G), which is fitting exacrly for the FA-06. The advantage is, that you also can use this case as a backpack (on a bike, a bicycle, in tram and so on). Very cool!

Sample photo:

Normally it's not possible, because the Transpose-Function is combined with the kayboard and not with the sound-module on FA. Theoretically it can be possible, when you send back the Midi-Signal to Studiologic (FA Midi-Out to Studiologic Midi-In), but only when the Studiologic understands Roland Sys...

In the Service Manual is written, to enter the Test Mode, press 5-7-9, hold it and switch Power on. In my FA-06 with Version 2.03 this doesn't work. Someone knows, weather there is a new Service Manual with other combinations of buttons in V 2.03, to enter the Test Mode? Or does someone know a new c...

You must select for alle instrument-tracks "both", means Main+Sub!

Candy

See Marketplace here in this Clanforum!

You yourself can decide, which tones are used in a layer sound: Change both sounds as you want. Then press the WRITE-Button and save your configuration as a User-Studio-Set. In the System-Settings you can select, that the system always start with the same sound. When you start your FA, you can take ...

Simply Question: Which parameter you want to change via ext. Controller?

Andy

wrong forum here!

Are you shure, that you are in the right forum here?

Candy

Joe P., think you have some Controler Dates (Hold, Volume or another one) in this measure!

Candy

[img][/img]

Save the Tone, later the Studio Set, you use the Tone within!

Greetz
Candy

You can set the Loop (Press Shift+Loop) to different Measures. First set it from 2-18 for example, make your recordings for the verse. Then change the Loop to 18-32 (also an example) and make the recordings for the refrain. and so on....

Candy

ATTENTION! The Roland Power Supplies are not all the same. Some have the +Pole inside, other ones outside. Important is also, that you buy a device with the correct Ampere-Number!
Best ist, to buy the Original (today it´s called Roland PSB-230 EU, it is about 30€).

Candy