Roland Clan Forums

I unistalled my integra 7 driver and now it cannot be reinstalled even using the manual installation instructions on the roland web site. Does anyone have a divers file they could email me? Thanks in advance PS I installed because the sound editor (version 1.45) would only load to 70 % and it was su...

Aw yes, that was it. If midi thru is enabled there is no output from the Integra. I disabled midi thru and it works perfectly.

Thank You

Thank you for your help.

I put the headphones on and I do get volume when I press the volume knob.

I still do not get any volume thru the headphones when playing a keyboard into the Integra. I can see the light flashing indicating it is receiving midi but I do not hear any sound.

Thanks again.

I was working it the system menu turning on midi thru and I must have done something else because now I have no volume on the outputs on my Integra-7. I have tried to set and reset everything in the system menu that I might have changed but no luck. I can see the midi going into the Integra and it i...

I apologize if this question has previously been answered. Here is my scenario, I create a new user tone from a patch on SRX-12 and save it as xsynth1. Then I save this user tone in a studio set called Studio1. I turn off my Integra 7 and when I turn it on again I do not load SRX-12 in the default s...

I have been having some problems with MIDI jitter. I originally thought it was a latency issue until I realized that MIDI jitter is a is actually what it is called. The problem I experience when playing is that the response from the Integra 7 is delayed in an unpredictable and random way with some n...

The Midi Solutions Event Processor Plus is awesome, it does exactly what I wanted and much more.

Thanks Royce,
I will give the midi solution event processor a try.
Caruso

Hi Royce,

Do you know of any device that will allow me to split midi channel 1 to midi channels 1 and 3?

I want to send midi from my foot controller on channel 1 then split to control my XV-5080 on channels 1 and 3 or on all midi channels.

Thank You,
Caruso

Is there any way to turn on and off individual effects in MFX of the XV-5080? For example, I would like to use a midi cc command to turn on and off the phaser within the rhodes muti MFX, is this possible? I see it is possible to controll the parameters of the phaser using a control source and destin...

Hi Royce, Thanks again for your help. I tried using the cutoff in the matrix as you described and it worked to turn patches on and off. I cannot have another patch turn on when I turn the first patch off. You would think that I could just set the REV control to the opposite that I could have one pat...

Thanks for the help Royce and Emmerson. Ideally I would like to use CC to mute and unmute but apparently I cannot do that (like you said Royce). I searched the midi implementation chart in the owners manual but could not find a command for mute channel. I tried using volume commands but I run into s...

Is there any way to turn on and off patches in a performance with the XV-5080 using midi? Let's say for example that I have a performance that has 6 parts (patches). I want to use midi command 28 turn off parts 2 and 3 while at the same time I turn on part 4 (which was initially turned off). How cou...

What is the difference between Outputs A,B,C,D and 1,2,3,4,5,6,7,8 on the Xv-5080? I see that MFX can only be routed to A,B,C and D, if I have outputs 1 and 3 plugged in to my mixer will I get the stereo MFX for A sent to output 1 and the MFX for B sent to output 3? Or will I only get the one side o...

Thanks again Royce ,you re the master on the XV-5080. Setting the REV is the trick to get the 5080 to recognize the foot controller for sure. I was wondering what Rev was for. I was thinking it was another place to add reverb. I was still having a problem because the depressed value on the foot cont...