Roland Clan Forums

Hi, I am not clear on why you want to swap out the SD Card with 64 different samples to reuse in the same Song?Studio set? Thats bit of a manual long winded task? I presume you know each SONG?STUDIO set can have store its own set of 64 samples. So you can have 1,000's of samples on one card..256 plu...

Hi, Thats an easy one: your close but not close enough. You are not creating...there is already a Tempo and Time, so modify is your aim. Microscope > VIEW > TRACK SELECT > Scroll down through tracks 1-16 and at the bottom is Time and Tempo current settings which you can change. Onwards......

Hi, Sorry but I don't understand what you are trying to do? What do you exactly mean by ' triggering a Studio Set in a DAW? Do you mean 'loading up' a specific Studio Set? If so, its easy to send a Control Change message from a DAW to the FA to load up a specific Studio Set. I do it extensively. Are...

Hi, I have not connected the FA to an iOS, nor have I used Sunday Sounds app.So unable to help much. Roland Knowledge based gives some basic info on connecting to iOS....see ....FA-06 FA-07 FA-08: Connecting to an iOS Device..... https://support.roland.com/hc/en-us/articles/115004414746-FA-06-FA-07-...

Each Studio set has 16 Channels/Tracks. Each track can have ONE patch/sound. So every Studio Set can have 16 different Sounds/Patches. Once you have set-up all 16 tracks ( or as many as you want ) you can then decide which tracks you want to play across the full width of your keyboard or just part o...

Hi, Quick reply. You cant set Bank 2 to play on bottom C. The 64 pads are fixed to play on the first 64 keys starting at Bottom C and going up..so Bank 1 goes from bottom C...up the first 16 keys...then Bank 2 up the next 16 keys etc. Why not play the Pads them selves instead of the keys..playing th...

Hi JonBristol, I have seen your post before but have not replied waiting to see if the earlier post helped. Obviously that an No. You have given very little detail, so I did not and don't know were to start. The FA DOES work as a MIDI controller with most DAW's and LIMITED DAW control with several. ...

Hi Fleshtronic, I don't use Reaper, nor Windows. I do use Ableton and a Mac laptop. I do use some Native Instrument Plug-ins and many many many others. I therefore cant give you detailed set-up information but can give you some ideas to consider. I do have 2 Roland keyboards, The JD-xi and the FA06....

Hi, Yes. Go to Part View, toggle to the right until you get the MIDI RX FILTER screen. If you scroll to the right again until you select the HD column. Here you can select each of your 16 channels and select wether you want HOLD on or off for each channel. Get used to this page as it allows you lots...

Hi, I change all my 300plus studio sets from Ableton using USB midi. I don't know wether your mode of control will work and don't currently have access to my kit to play/try. I do know that I need to use MSB 86 NOT 85. Apparently there is a difference in the midi numbering used by different companie...

Hi Tone, You ask ' is it possible to translate the keyboard ranges to cubase via midii'? I am not sure exactly what you mean? Do you want to record midi or audio in your DAW? Don't know if this helps but...I decided that there are severe difficulties and limitations using and manipulating midi in th...

Hi again, I am not aware that you can connect to a computer to the FA06 via USB without the means of a DAW as the interface programme. I have never tried and have no desire to try it out. Without the many many benefits of a DAW I can not see the point. You can even get free good DAW's. Sorry, can he...

Hi, You say 'cant get the audio interface function on my FA06 to work". I am not clear what you mean by this or what you are trying to do. The only audio signal in function on the FA is the Guitar/Microphone audio input jack on the back of the back of the FA? Perhaps you can clarify what you ar...

Go to Part View/ Midi RX Filter page. RX stands for receive midi. Turn off all the channels that you don't want to sound when midi is input on it. So just leave channel 3 on and it will ignore midi received on other channels.Lea ve remote keyboard alone/off.

Hi latoyabb,

I would recommend that you re-post your question as a new thread under a new appropriate heading if you want to get the maximum focussed attention and response.