Roland Clan Forums

Unfortunately I do not have the firmware.

Case 1. XP-60 use FLASH ROM in the early lots (S/N from Z**0100 to Z**1099). These following that, how to update FLASH ROM. Required item: two 2HD FDs for update of XP-60. XP-60 Ver. UP DISK SET (PNO. 17048904). Method: 1.1. Load DISK 1 into the disk drive. 1.2. Power on. 1.3. LCD Backlight on, and ...

I have uploaded some stuff about the Roland XV-3080 on the following link: https://drive.google.com/drive/folders/1Di8QipfWDluBZlN6c9_fzUQnfpfp6Cye "IDENTIFYING THE VERSION NUMBER Step 1. Turn on the XV-3080 power. Step 2. While holding down [EXIT], press [<-] to enter the DEMO mode. Step 3. Pr...

Step 1: "Hold down the [A. PIANO] button while turning the power on. The RD-64 will operate as a MIDI controller keyboard with the same functionality as the Roland A-88. In Controller mode, no sound is produced from the RD-64’s internal sound generator. Also, nothing will happen when you press ...

I don't know much about the Roland D-70 either. General good advice: if you don't have to, don't disassemble the D-70, because you might ruin it.

The VR-09 does not pass MIDI from the MIDI In to MIDI Out. You have to buy an external device to split the MIDI to the VR-09 and sequencer separately.

(Roland D-70) "Some machines with old firmware work perfectly with editor/librarians, others with newer firmware do not." (nick) "If all you want to do with a D-70 is call up preset patches and play, it's a great keyboard.(...) If you intend to use it with a computer and/or incorporat...

I tried to find out from the Korg Wavestation manual exactly how the Korg Wavestation EX sends the Bank Select MSB (Bc 00 dd), Bank Select LSB (Bc 20 dd) and Program Change (Cc pp) messages in Patch and Performance mode, but for me was not clearly revealed. According to the manual, it always sends a...

1. For JV-1080, the SETUP / <Control Channel> parameter value tells you on which MIDI channel to send Bank Select MSB, Bank Select LSB and Program Change messages to change the Performance. For the SETUP / RECEIVE MIDI parameter, Bank Select ("Bnk") and Program Change "P.C" recep...

SMF Update Applications:
https://drive.google.com/drive/folders/ ... FTMVgHDSYs

Yes, it's true. Only the Roland JV-80 and JV-880 need to transfer the patches from the card, the other Roland instruments (e.g. JV-90, JV-1000, JV-1080) can use them directly.

1st tip: try using a different MIDI cable.

2nd tip: use the XV-5050's test mode to test the MIDI In and MIDI Out connectors. See "Roland XV-5050 Service Notes".
https://www.synthxl.com/wp-content/uplo ... Manual.pdf

(corrected) Which MIDI channel(s) does the HOLD (P1) pedal send to in Dual/Split mode? 1. No assignment to HOLD (P1) pedal: sends CC64 to Lower and Upper channel. 2. A Channel Message is assigned to the HOLD (P1) pedal and Omni=Off: sends to the assigned channel of the controller. 3. A Channel Messa...

1. Do you want global chromatic transposition?
2. Which devices are we talking about exactly?