Roland Clan Forums

Model expansions were free for the Fantom but cost for the Fantom-0 line. The downloads are different versions and have to be purchased @ $150 each. As an owner of both a Fantom 7 and Fantom-07 I can tell you firsthand that you cannot load the downloaded models from the 7 into the 07--the 07 won't r...

Just make sure the voltages in and out are the same. if you want to play it safe, just go to a music store nearby, or order a brand name replacement from them. This is a standard IEC-compliant power cord. There is no name-brand replacement and there is no voltage issue (unless you're going to run o...

As far as I know, you can only reserve the minimum number of voices.....you can't set the maximum.

It is a completely standard IEC power cord. Get whatever length and connector style (straight, right-angled, etc.) you need. Ideally you shouldn't go with a higher AWG rating (should be printed on the cable) since that determines the overall amperage/wattage it can support. However, because the Fant...

PauloF wrote: ↑18:57, 19 April 2022 Hi guys,
Can any Fantom-0 owner(s) comment on the above quote, in order to clarify on the correct number of Scene Banks on the Fantom-0, please?

Thanks
PauloF

Fantom and Fantom-0 have the same number of Scenes and Banks. 4 X 128 each

One other minor correction: SuperNatural Acoustic Piano 2 (EXSN03) is available as a free download for the Fantom via Roland Cloud.

I was the hoping the same thing but alas there is no real crossover between platforms. I had to reprogram all 250+ of my Performances from X to the Fantom.

Have a try and tell me how to change Rhythm from zone 10 (default) to any other; or not to bother as it cannot be changed...🥴🥴🥴🥴 I will tell my guess, if any, by the end of April...🕵️‍♂️🕵️‍♂️🕵️‍♂️🕵️‍♂️ Time passes slowly up here in the mountains...⏱️⏱️⏱️⏱️ I was able to do this quite easily on my F...

Somehow my Fantom 08 shows me zones 9-16 greyed out. No sound is coming from any of these zones. I see them greyed out in the zone view, in the pattern view and in the mixer. Is there a settings to activate them? Menu -> System -> General -> Scene Remain must be set to 'Off' to use all 16 Zones. Th...

So, what's your plan, going to buy the 07 ? (I tend to, but just for the sake of it I wanna play it first in a music store) Same here. I want to see how the keybed feels compared to the 7 and my old X7 (which I loved for live playing). As long as it's a reasonable replica of either of those I'll pr...

I'm in the same boat as you. Have a 7 but am getting tired of the size and weight in a hard case for gigging so the 07 is very attractive. Near as I can tell, if you can live without V-Piano, only 256MB of keyboard-triggered samples, no nZyme, no aftertouch, and not all of the expansions installed a...

Hi Wayne An extra note: Same slots for the expansion boards are not necessary as the waves and patches are unique for the different types of SRX cards internally in the Fantom. The X8 will find them if you have user Patches/Performances that reference the expansion card elements no matter what slot...

One thing I realized when importing Scenes, was: if that zone had user tones, such tones are also imported. And in case the user tone exists... is duplicated in a different slot. This is a good catch! And also unfortunate. I understand the logic behind doing it, otherwise the Tone in a Zone in a Sc...

Hi Pianoman41 So when I show up to the gig, I would need to do the following in this order: 1. Update to latest firmware 2. Install all EXZ packs 3. Install all EXS packs 4. Install all EXM models 5. Restore latest backup, including samples In my view you should do, after step 1: a) A Factory reset...

Just want to confirm my steps are correct if I'm using a loaner Fantom if I'm flying to a gig and want to just bring a USB flash drive. Since my Fantom has every expansion, on the drive I need the following: 1 Latest firmware 2. EXZ wave expansion packs (001-015) 3. EXS SuperNatural expansions packs...