Roland Clan Forums

Unfortunately, Roland does not let you change the phase of the LFO waveforms. The most straightforward workaround is to create a Step LFO waveform. Change the LFO waveform to "STEP". Draw your sine wave across the 16 steps of the Step LFO. And make sure that "LFO Step Type" is &q...

Perform a System Write:

Press MENU --> F2) System --> F7) Sys Write

They should all be there, in the EXP-10 Orchestra Collection. According to this all of the SR-JV80-13 waveforms are included in SRX-06. And EXP-10 is a reformat of SRX-06. To be sure, download the EXP-10 folder on this page and open the "SoundList_EXP-10_DS_W" PDF file to look for specific...

Yes

Roland UK - Yosemite driver

Roland UK - all downloads for Fantom-G

I'm curious what you think of Fantom Creator and how it compares to YASE.

In Single Mode, F3) Part View - Pitch - Porta SW is probably "OFF". It should be "PATCH".

blues player wrote:…there is no "multiple input S/PDIF 'mixer' " or audio interfaces…

Roland M-1000

Discontinued, but you can find a used one if you are patient.

The four SN-S filter models originated with OS Version 2 of the Jupiter-80. When Version 2 was released, Roland published the following descriptions, but later withdrew them: LPF 1: Jupiter-80 (held over from Version 1) LPF 2: Jupiter-8 LPF 3: MiniMoog LPF 4: Prophet 5 Dan Krisher describes: https:/...

It's at the root level of your USB drive, not in a Project folder.

If I remember correctly, the Fantom adds the folder when it formats a drive. Is it's not there, just make one yourself.

Simply turn the MFX switch on or off, as on the Effects Edit screen, while recording.

When Transmit Edit Data is "ON," nearly everything you do on the FA will transmit System Exclusive messages. That's why it is usually "OFF" ;-)

Don't have an FA, but from experience with Roland products, I believe the problem is that the sequencer is not receiving System Exclusive messages from the FA. You should make sure that Transmit Edit Data is "ON." You can probably find it under Menu>System>MIDI This is usually set to "...

You must place your samples in the IMPORT folder, not the SMPL folder.

Video tutorial:

https://www.youtube.com/watch?v=OeP7Xaahs0o

The volume knob has no effect on the digital out.