Effects Levels

Forum for JUNO-G
Post Reply
Tarkov72
Posts: 60
Joined: 05:19, 18 February 2009

Effects Levels

Post by Tarkov72 »

I don't remember having this problem before, so maybe I'm just being dense, but I cannot figure out how to alter the level of effects on an external output. For example, I am putting a synth into the Juno-G's input so I can run a delay effect on it. However, I cannot control the level of the effect applied (like a dry/wet kind of deal). The only thing I can do is raise and lower the overall volume of the entire sound. Can the Juno-G not control this part of effects? I thought it could but I am stumped... any advice would be appreciated.
mb
Posts: 15
Joined: 14:58, 16 February 2011

Re: Effects Levels

Post by mb »

From my understanding is you have the delay working on an external sound but can't control the level of the delay. The delay effects 'level' is the very last setting on the effects screen. Hit the effects button then the MFX button and then hold down the down arrow (or use the wheel) to go to the very last setting 'level'. This can be from 0-127. This should change the effect output.
Post Reply