Control MMC junoG from another keybord

Forum for JUNO-G

Control MMC junoG from another keybord

Postby kernell32 » 19:53, 25 July 2013

Hi guys,
this is my setup...roland Juno G + Novation SL61.

I want Start the sequencer on Juno from the panel of novation.
I selected SLAVE on the juno in the page System midi MMC MTC but the sequencer don't started.

can someone help me?
kernell32
 
Posts: 26
Joined: 09:25, 1 May 2007


Re: Control MMC junoG from another keybord

Postby Mystic38 » 14:18, 4 August 2013

iirc you will not be able to do this directly...

You can use the SL61 to start/stop a DAW, and slave the JG to that.
Mystic38
 
Posts: 1099
Joined: 14:04, 24 August 2009

Re: Control MMC junoG from another keybord

Postby kernell32 » 21:06, 4 August 2013

in setup live don't have a pc/daw...
kernell32
 
Posts: 26
Joined: 09:25, 1 May 2007

Re: Control MMC junoG from another keybord

Postby Mystic38 » 15:35, 22 September 2013

Yes you can do this.

Its much easier to use system realtime messages. You can program the Novation keyboard to send system realtime start/stop .

kernell32 wrote:Hi guys,
this is my setup...roland Juno G + Novation SL61.

I want Start the sequencer on Juno from the panel of novation.
I selected SLAVE on the juno in the page System midi MMC MTC but the sequencer don't started.

can someone help me?


Heres a little more info..

I have the fantom G, MC-808 and Novation Nova, all of whom need clk PLUS realtime start/stop to operate... the Juno G should have similar settings to the Fantom G.

sync mode = slave-midi
clk source = midi

On the Novation ( I have SL remote compact)

global:

clk source auto
clk output M1

template:

all outputs to M1
press edit + play, change message to realtime low value = rt play , button type normal
press edit + stop, msg = realtime stop, button type normal.

I don't currently have FF/RW setup as this requires SPP and haven't been hacked to sort it out..

hope this helps
Mystic38
 
Posts: 1099
Joined: 14:04, 24 August 2009

Re: Control MMC junoG from another keybord

Postby kernell32 » 11:05, 4 May 2015

Thanks for the support, but when i press PLAY on sl mk2, the song on juno G don't start...

If I connect Sonar on PC with juno G, I don't have problem, when I play start on Sonar, the seq on juno start also to.
I think the problem is on setting on sl mk2.
kernell32
 
Posts: 26
Joined: 09:25, 1 May 2007

Re: Control MMC junoG from another keybord

Postby marczellm » 16:48, 5 May 2015

JUNO-G only communicates via MIDI if you set the USB mode to STORAGE. Have you done that?
marczellm
 
Posts: 103
Joined: 20:30, 24 March 2011

Re: Control MMC junoG from another keybord

Postby kernell32 » 19:23, 6 May 2015

I use classic midi cable.
kernell32
 
Posts: 26
Joined: 09:25, 1 May 2007

Re: Control MMC junoG from another keybord

Postby dennis elbow » 18:43, 8 May 2015

does the juno g sequencer parts have any midi recorded data in it,i found that i had to record some data into the sequencer part even if it is no notes.worth a try.
good luck.
dennis elbow
 
Posts: 57
Joined: 17:57, 1 February 2014

Re: Control MMC junoG from another keybord

Postby marczellm » 14:02, 14 May 2015

kernell32 wrote:I use classic midi cable.


The JUNO-G can only communicate via MIDI cable if you set the USB mode to STORAGE. Press the USB button and change the mode to STORAGE. Otherwise the MIDI ports on the JUNO do not work.
marczellm
 
Posts: 103
Joined: 20:30, 24 March 2011


Return to JUNO-G

Who is online

Users browsing this forum: No registered users and 2 guests