hello all does anyone know how to have the juno g as the slave in a chian of three devices.
i will try to explain.
i have a korg emx1 and a korg esx1 both synced,midi out from emx1 into midi in on the esx1 then out of the
esx1 into the juno g.(juno g set as slave)
i have the emx1 drum channel on midi channel 10,then synth parts 1 to 5 set as 1 to 5 midi channel.
i have esx1 drum channel set to midi channel 11 and the two synth parts set to 6 and 7 midi channels.
i have the emx1 as the master first in the chain set to internal clock then esx1 second in the chain set to ext clock and juno g third in the chain set as slave.
i can record notes into the juno g but i cannot get the master and the second in chain to transmit notes at the same time into the juno g.but it's one or the other.
i hope im making sense.
i have tried swapping the midi out to the midi thru on the second in the chain(esx1)but will only transmit one of the korgs.weird.
so i want to be able to use both korgs emx1 and esx1 notes into juno g at the same time.
and not have to swap the midi out to the midi thru when i want to trigger emx1 or esx1.
juno g as slave from emx1 and esx1?
-
- Posts: 70
- Joined: 17:57, 1 February 2014
Re: juno g as slave from emx1 and esx1?
you can delete this thread if you like don't need an answer so not that bothered if anyone does.
.and i'm not being sarcastic.
cheers.
.and i'm not being sarcastic.
cheers.