I've had the Juno G since it came out and still use it frequently. The internal sequencer is a great tool. However, when I want to export individual "tracks" to an external recorder, all I can do is send two at a time and have them go to separate tracks by panning one full left and one full right in Output A.
My description might be a bit muddled, but the overall question I have is: Does output B actually output ANYTHING?? I've never gotten any audio out of those two (L/R) lines and the manual doesn't offer any further description as to what they do, if anything.
Anyone have any help?
Thanks!
Juno G outputs A and B
- craigsfrost
- Posts: 80
- Joined: 05:21, 7 March 2018
- Location: SF, CA, USA
- Contact:
Re: Juno G outputs A and B
Yes, output B can send out audio if you assign tracks to those outs in the effects menu on the lower left (that's just from memory). You can hard pan 1 and 2 and then also 3 and 4 but you must assign 3 and 4.
- Leo Castro
- Posts: 139
- Joined: 22:58, 17 June 2016
Re: Juno G outputs A and B
Hi! I think you can do it without panning, just choosing outputs 1, 2, 3 or 4.
The only "bad" side is you loose the stereo fx or panning patches.
And if Hifi is not a problem, you can use headphones output to send a stereo mix (without the 4 independent outputs "separate patches") or 2 more mono sounds.
The only "bad" side is you loose the stereo fx or panning patches.
And if Hifi is not a problem, you can use headphones output to send a stereo mix (without the 4 independent outputs "separate patches") or 2 more mono sounds.
Re: Juno G outputs A and B
Where in the manual can i see how to assign the tracks to specific outputs?
- Leo Castro
- Posts: 139
- Joined: 22:58, 17 June 2016
Re: Juno G outputs A and B
Pages: 48, 57, 62, 65(Performance Mode), 126(FX)