MC 909 - LFO assigned to Cutoff

Forum for MC, SP, TR series and other groove and drum machines
Post Reply
mtec
Posts: 1
Joined: 10:13, 5 January 2014

MC 909 - LFO assigned to Cutoff

Post by mtec »

I have been trying to modulate the cutoff with the LFO, but can't seem to find were to assign it. I have searched the manual with no luck. Any assistance would be much appreciated.
chrisbeeXL
Posts: 9
Joined: 20:53, 17 August 2013

Re: MC 909 - LFO assigned to Cutoff

Post by chrisbeeXL »

I just asked the same question. Did you find anything? I don't use LFO for pitch on the 909... I really want the knob to control the depth of the amp and filter...Been using this unit for over a year and found nothing... but this looks promising here http://www.mc909.org/utilisation/22-4-c ... -vos-patch
DoDD242
Posts: 4
Joined: 17:24, 1 September 2014

Re: MC 909 - LFO assigned to Cutoff

Post by DoDD242 »

You have to hold the rate/depth button down. You'll see a tiny menu popup in the lower right-hand corner of the display and then you can use the dial to select which parameter you want the depth knob to affect (pitch, filter, pan, etc).
Post Reply