MC 909 transmit program/bank change?
Posted: 09:09, 10 October 2015
Hello all,
I've searched high and low for a solution to this but I can't find it anywhere. So I hope someone here can help me out.
Right now, I use my MC909 as a controller for a Bass Station Rack, A-Station, Ultranova and U220.
On the MC909, Transmit Program and Transmit Bank Change are set to On. But every time I start a song, I have to manually set the bank/program on each of the external sound devices themselves, instead of the MC909 selecting them externally via MIDI.
Basically, I want the MC909 to select the bank and program on the external sound devices whenever I start a pattern on the MC909.
The sounds on the sound devices do play via MIDI from the MC909, and I've tried these settings on the MC909:
System
Version 1.23
Seq Sync
Sync Mode: Master/Remote
Sync Output: On
Arpeggio Sync Mode: Off
RPS Trigger Quantize: 16th
BPM Lock: Off
MIDI Tx
Transmit Program Change: On
Transmit Bank Select: On
Transmit Active Sensing: On
Transmit Patch Edit Type: TYPE-QUICK / TYPE-CC
Transmit Edit Data: On/Off
Soft Through: On
MIDI Rx
Remote Keyboard Switch: On
Device ID: 17
Receive Program Change: On
Receive Bank Select: On
Receive Exclusive: On
Thanks for your help!
I've searched high and low for a solution to this but I can't find it anywhere. So I hope someone here can help me out.
Right now, I use my MC909 as a controller for a Bass Station Rack, A-Station, Ultranova and U220.
On the MC909, Transmit Program and Transmit Bank Change are set to On. But every time I start a song, I have to manually set the bank/program on each of the external sound devices themselves, instead of the MC909 selecting them externally via MIDI.
Basically, I want the MC909 to select the bank and program on the external sound devices whenever I start a pattern on the MC909.
The sounds on the sound devices do play via MIDI from the MC909, and I've tried these settings on the MC909:
System
Version 1.23
Seq Sync
Sync Mode: Master/Remote
Sync Output: On
Arpeggio Sync Mode: Off
RPS Trigger Quantize: 16th
BPM Lock: Off
MIDI Tx
Transmit Program Change: On
Transmit Bank Select: On
Transmit Active Sensing: On
Transmit Patch Edit Type: TYPE-QUICK / TYPE-CC
Transmit Edit Data: On/Off
Soft Through: On
MIDI Rx
Remote Keyboard Switch: On
Device ID: 17
Receive Program Change: On
Receive Bank Select: On
Receive Exclusive: On
Thanks for your help!