V-Synth - TVA (ADSR) sliders not working...

Forum for V-Synth, V-Synth XT, V-Synth GT and V-cards
Post Reply
mingle
Posts: 7
Joined: 00:40, 18 June 2017

V-Synth - TVA (ADSR) sliders not working...

Post by mingle »

Hi Guys,

New to the site (looks very handy!). Just picked up a V-Synth (v2.0) yesterday and all is well, with the exception of the 4 TVA sliders. They seem fine, but don't do anything

When I'm in the 'TVA' screen I can adjust the ADSR using the touch-screen, but when I move the sliders, nothing appears to happens on the screen, or to the patch currently being played. When I move the sliders, does the corresponding parameter on the screen also change?

All other controls work fine and the TVA sliders appear in good shape and (mechanically) working.

Am I missing something, or does it look like I need to operate?

Cheers,

Mike.
mingle
Posts: 7
Joined: 00:40, 18 June 2017

Re: V-Synth - TVA (ADSR) sliders not working...

Post by mingle »

I've ran the system test and sure enough, the sliders are not responding. Same deal with the COSM2 "Width" and "Detune" pots :-(

Looks like it needs to go in for a service.

Cheers,

Mike.
Loedown
Posts: 1
Joined: 09:12, 27 July 2017

Re: V-Synth - TVA (ADSR) sliders not working...

Post by Loedown »

I fixed one today with exactly the same fault. Cracked tracks around the Resonance pot on the front panel PCB. If someone has a hi res shot of that board I will highlight which tracks were cracked.
Post Reply