MC-808 as slave but sending the clock to Pulse 2

Forum for MC-808

MC-808 as slave but sending the clock to Pulse 2

Postby Technoseeders » 19:16, 7 January 2017

Hello everyone,

I am afraid there is no solution to this problem and someone might have already presented this issue however I'll go ahead and ask.

My setup is the following:

Laptop with traktor software + MC-808 + Pulse 2 (desktop module)

Traktor generates the midi clock and sends it to the MC-808 which is in slave mode in order to lock to the clock during the set. The MC-808 is also used as a controller for the pulse2 synth and here comes the problem:

- the Pulse 2 has an internal arpeggiator, which requires a clock in order to run (internal or external). However the MC-808 sends no clock when in SLAVE mode making the pulse arpeggiator unlocked to the set and it requires me to use the MC-808 arpeggiator which is way less controllable.

Any solution?

Thank you,

Cheers
Technoseeders
 
Posts: 1
Joined: 19:05, 7 January 2017


Re: MC-808 as slave but sending the clock to Pulse 2

Postby DaniH » 15:40, 8 January 2017

Have you tried midi thru or remote instead of slave??
DaniH
 
Posts: 97
Joined: 13:08, 13 December 2010

Re: MC-808 as slave but sending the clock to Pulse 2

Postby Integrated » 03:22, 13 January 2017

Midi mergers and splitters could be a solution. Like Kenton MIDI Thru 5 and Kenton Midi Merge. There are other companies as well, of course.
Integrated
 
Posts: 37
Joined: 00:46, 17 March 2014


Return to MC-808

Who is online

Users browsing this forum: No registered users and 2 guests