How to turn on reverb on the MC-808?

Forum for MC-808
Post Reply
spiral
Posts: 44
Joined: 09:38, 18 March 2004
Location: chicago

How to turn on reverb on the MC-808?

Post by spiral »

The only way i have found to turn reverb on is through the external editor under "routing" and then increasing "Part reverb send level".

It seems crazy there is a reverb switch but no way to turn on reverb for the whole pattern. Any ideas?
bassman
Posts: 2509
Joined: 22:30, 5 September 2004
Location: Anchorage, Alaska

Re: How to turn on reverb on the MC-808?

Post by bassman »

Have you checked page 64 in the manual? It states that you need to do a 'Shift' 'Reverb' to turn reverb off and on. This is listed under the 'Pattern Mode' section.

Perhaps this will help.

Bassman
spiral
Posts: 44
Joined: 09:38, 18 March 2004
Location: chicago

Re: How to turn on reverb on the MC-808?

Post by spiral »

Thanks for the reply. I have read the manual and shift+reverb brings up the parameter for what kind of reverb, but that is about it. (manual also only says "selecting reverb type"). There has to be a way to adjust send parameters.
ark
Posts: 44
Joined: 16:48, 25 July 2006
Location: Gillette, NJ

Re: How to turn on reverb on the MC-808?

Post by ark »

I think that to adjust reverb parameters, you have to use the sofware editor.
Post Reply