[RPS mixer] feature mentioned in the manual does not work on my machine (OS 1.03).
as i switch between [RPS mixer] fader assignments the faders do go to the position written in an RPS set.
BUT
changing any of the parameters available in the [RPS mixer] mode does not affect the sound of RPS parts.
e.g. i can lower all 8 volume faders to zero with [PART ASSIGN] being switched off but RPS parts 1-8 still play at their default volume.
in other words RPS parts do not react to fader operations in [RPS mixer] as it is described in the manual.
could someone please check this on other machine?
thanks in advance!
MC-808 RPS mixer /problem/ OS 1.03
Re: MC-808 RPS mixer /problem/ OS 1.03
I´ve got these problem with some rps but not with all,i haven´the last os...
Re: MC-808 RPS mixer /problem/ OS 1.03
i tried writing my own RPS set, but the [RPS mixer] behavior is the same - no response to faders.
please check this, mates.
i'm really concerned whether its an OS bug or just my machine quirk.
OS1.03
thanks.
please check this, mates.
i'm really concerned whether its an OS bug or just my machine quirk.
OS1.03
thanks.
Re: MC-808 RPS mixer /problem/ OS 1.03
I made my own rps sets and i have problems sometimes with the volume,tone,pan of the rps...But not always,only few times.I think that is a problem with the lenght of the phrases.The new value only do your job at the start of the phrase,if you are in the midlle of the sequence you must wait to the start ...Excuse my english is so bad!!!!I´m spanish......Thanx
Re: MC-808 RPS mixer /problem/ OS 1.03
in my case i have no reaction to faders ever, be it a start of the phrase, whatever
Arievilo >> my english is so bad!
i can understand you, that's the main thgin 8)
i'm not a native speaker either
Arievilo >> my english is so bad!
i can understand you, that's the main thgin 8)
i'm not a native speaker either
Re: MC-808 RPS mixer /problem/ OS 1.03
if i stop the pattern and let run the rps the volume,pan...works find...try it.
Re: MC-808 RPS mixer /problem/ OS 1.03
Arievilo: thanks comrade
your method did not work as well %(
your method did not work as well %(
Re: MC-808 RPS mixer /problem/ OS 1.03
Upsss!!!!!Maybe you have a bug!!!!!Sorry....
- DrumTechnology
- Posts: 1
- Joined: 23:08, 15 May 2013
- Contact:
Re: MC-808 RPS mixer /problem/ OS 1.03
Hi
In RPS mixer press and hold (Part level) button ... now light of (part select mute) are dark.Hold (Part level) button + All (Part select mute) button.
Regards :-)
In RPS mixer press and hold (Part level) button ... now light of (part select mute) are dark.Hold (Part level) button + All (Part select mute) button.
Regards :-)