I followed the manual, in usb midi mode on 808, midi soft through is off, and remote kbd is off, I have installed roland usb midi driver, and using the usb to connect to cpu, problem I have is with MC-808 input and output port in the options dialog of the software to MC-808, don't know how to set it up so I don't get the usb midi configure error when I start the editor, I would like to take a sample chop it up in software editor and send it back to 808 to play the chop sample on the pad.
thx for any help!
Need help with software editor setup
Re: Need help with software editor setup
Hi, please make sure that the usb mode is set to midi mode.
Bye, Dirk
Bye, Dirk
Re: Need help with software editor setup
yes it is, still can figure out configuration on software editor so i won't get that error message i stated in above.
will take any help
thx
will take any help
thx
Re: Need help with software editor setup
Hi,
have you had a look into the mc-808-faq on this site?
Bye, Dirk.
have you had a look into the mc-808-faq on this site?
Bye, Dirk.
Re: Need help with software editor setup
Maybe yous could tell me what you have your midi setup option on, in the software editor drop down option relative to your setup. Also in the same option drop down menu, what is the through option on?
Re: Need help with software editor setup
Hi,
will have a look this evening.
Bye, Dirk.
will have a look this evening.
Bye, Dirk.
Re: Need help with software editor setup
Hi,
settings are:
MC-808 in USB-Midi-Mode
MC-808 Input : MC-808
MC-808 Output: MC-808
Device ID : 17 (matches setting on MC-808)
Bye, Dirk.
settings are:
MC-808 in USB-Midi-Mode
MC-808 Input : MC-808
MC-808 Output: MC-808
Device ID : 17 (matches setting on MC-808)
Bye, Dirk.