how do I erase a part

[dinkis]

Iv looked in the form and in the manual. Cant find anything in the manual but found this in the forms by dirk=How do i erase or initialize a part?
Press [PATTERN] and then [SHIFT] + [ERASE]. Select source bar 1 and the the maximum end bar. After that select event type "ALL" and press [ENTER]. But when I do that I press play and there seems to be nothing there( no parts or sound). can someone help. maybe Im not understanding how to do it correctly

[dr_boehm]

Hi,

all the pattern functions will work on the parts where the part buttons are lit. So after pressing [Shift]+[Erase], make sure that only these part lamps are lit that should be erased. By default all lamps are lit.

Bye, Dirk.

[dinkis]

Thanks alot Dirk!

[total_zet]

this does not work for me.. !!
I make sure, only that part is lit which I want to erase..
but after that all parts are erase..

the only way which work for me is recording in real time with option replace..

[dr_boehm]

Hi total_zet,

please try again. This is working for me too.

Bye, Dirk.

[total_zet]

Hi Dirk,

I did try it many times, I got switched on Pattern, the only part is lit which I want to erase, all other are not lit, they are just blinking, than I press [SHIFT] + [ERASE] and enter. But the result is all pattern is erased, not only the specific part.

Is something wrong on my steps?

I can only erase the part with real time recoding with option replace.. thats the only way it works.

[dr_boehm]

Hi,

the trick is:

1) press [Shift] + [Erase]
2) Now make only the part you want to erase lit
3) Now press [Enter}

Please try that entry.

Bye, Dirk.