When I start up the MC-808 I am having issues with some saples not being loaded (large samples usually).
I had saved the patches the samples were in and also did a save all.
There is also another issue I am having where the tempos of patterns seem to change after loading (randonmly to odd values like 23.9bpm when they were all 120bpm). This seems to carry over into songs even after the pattern tempos have been updated and patterns re saved. The only thing that seems to cure it is re creating the song.
Can anyone offer any advice?
Issues when re loading from off
Re: Issues when re loading from off
Hi dcer10,
first question: Does this happen with any compact flash card or only with some? They sometimes partly loose data after some time.
I would first try to replace the (possible) faulty cf cards as this is easy and cheap.
It could also be the DIMM chip but then behaviour is mostly weird and non reproduceable.
Other causes could be: You can record tempo changes on the tempo track. If that was done by accidance then changing of tempo would work normal as desired.
Hope that helps!
Bye, Dirk.
first question: Does this happen with any compact flash card or only with some? They sometimes partly loose data after some time.
I would first try to replace the (possible) faulty cf cards as this is easy and cheap.
It could also be the DIMM chip but then behaviour is mostly weird and non reproduceable.
Other causes could be: You can record tempo changes on the tempo track. If that was done by accidance then changing of tempo would work normal as desired.
Hope that helps!
Bye, Dirk.