CC ##

Forum for MC-808
Post Reply
Moticos
Posts: 9
Joined: 05:16, 4 October 2010

CC ##

Post by Moticos »

How do I set CC # on the 808. Im using the 808 as a sequencer and wanted to control another synth.
dr_boehm
Posts: 700
Joined: 11:05, 11 November 2006
Location: Bochum, Germany

Re: CC ##

Post by dr_boehm »

Hi Moticos,

Have you tried the microscope edit?

Maybe you can give a more precise description of what you want to do, then i can give better support :-)

Bye, Dirk.
Moticos
Posts: 9
Joined: 05:16, 4 October 2010

Re: CC ##

Post by Moticos »

I want to be able to control the LFO on another synth/sampler. So i want to assign the cc## for the LFO slider on the 808 to control the LFO on the other machine. Is the microscope edit on the 808 editor?
dr_boehm
Posts: 700
Joined: 11:05, 11 November 2006
Location: Bochum, Germany

Re: CC ##

Post by dr_boehm »

Hi,

no. Microscope edit is in the sequencer where you can edit single midi events.

The controller sent by MC-808 are fix as far as i know. It only sends ctrl 7 if [PART LEVEL] is active and ctrl 10 (pan) if [PART PAN] is active. So to utilize this you must make your synth react on this ctrl #.

Bye, Dirk.
Robert13
Posts: 11
Joined: 13:09, 25 May 2010
Location: Netherlands
Contact:

Re: CC ##

Post by Robert13 »

Hello,

I have never tried it, but can't you record de CC# with realtime record, when you use an external midi-controller (e.g. Edirol PCR)?

Robert
dr_boehm
Posts: 700
Joined: 11:05, 11 November 2006
Location: Bochum, Germany

Re: CC ##

Post by dr_boehm »

Hi,

yes of cause you can. MC-808 will record everything in realtime record mode (even sysex).

Bye, Dirk.
Post Reply