problemzzz

Forum for MC-808
Post Reply
mindspinner
Posts: 2
Joined: 23:02, 14 February 2011

problemzzz

Post by mindspinner »

dear all ( is suppose fellow mc808'ers)


i would like to ask you all the following:

if i copy one part to another ([ALL] to either a "user" or "card") it nicely copies the pattern, but it does not copy the actual sounds to it, wich leads me to search all the sounds again!! is there a way to work around this?

it might be good to know that i don't use any samples, i just use the internal sounds wich i dont edit.


the second question is a bit of a story, i got 3 patterns to form a song, pat 2 uses part 5 (LFOcean) . if i record the song like this : pat 2, pat 1, pat 3 everything seems to work nice... but...

when recorded in : pat 1 pat 2 pat 3 etc. i dont hear part 5 anymore?!?!

ive re-recorded the song several times, initialized, even re-recorded pat 2, or made a complete new pattern plus song, still the same thing!

i'm worried that something is really really really wrong here?!


i hope someone out there can help me out?

thanks!

Randy
dr_boehm
Posts: 700
Joined: 11:05, 11 November 2006
Location: Bochum, Germany

Re: problemzzz

Post by dr_boehm »

Hi Randy,

just [write] the pattern to a new location instead of copying it.

Bye, Dirk.
Post Reply