How can I set up my mc808 with Rm1x as a master. But each time I try, it transmits all the midi notes to the Rm1x ( or other gear ). How can I turn off midi notes transmit, I went to system and turned everything off, but still it sends midi notes.
It works great as slave, but as master it keeps transmitting those annoying notes.
Anyone?
MC-808 as master, but sync only...
Re: MC-808 as master, but sync only...
Go into part param and have them transmit int (internal) not ext (external).
Re: MC-808 as master, but sync only...
you use 808 in slave mode so you don't have to keep changing the 808's BPM?? and does the rm1x have a midi filter sectionto turn off note/pc/cc etc ( rs7000 has this).
....... as a last resort disconnect 808's midi out cable to rm1x :-)
....... as a last resort disconnect 808's midi out cable to rm1x :-)
Re: MC-808 as master, but sync only...
Thanks for help, but I think I found the answer in the Mc808 Faq page.
How can i sync mc-808 and mc-505 like vanderson does?
If you want only a tempo sync with booth grooveboxes (without send the midi notes) : MC-808 > tempo sync to >MC-505 set the MC-505 to slave mode, in MC-808 you must change MIDI OUT settings for the all tracks (channels) SHIFT + PAD 13 (part parameters, and move cursor to SEQ OUTPUT ASSIGN) all tracks you must change to INT (internal) now MC-808 play only the internal tone generator without send anything to MC-505 Remember to save the pattern with new settings, because after power off, track parameters set to default ..
If you want play a tempo sync and send some notes from MC-808 to MC-505. Once again you must change settings in tracks, for which you want transmit to MC-505, so press SHIFT + PAD 13 (set to EXT external, now you can play notes from MC-808 but hear sounds only from MC-505, also you can set to BOOTH and play notes and hear sound from booth grooveboxes at the same time...)
I haven't tried this yet, but I'm sure this is what I needed.
Thanks for help anyways.
How can i sync mc-808 and mc-505 like vanderson does?
If you want only a tempo sync with booth grooveboxes (without send the midi notes) : MC-808 > tempo sync to >MC-505 set the MC-505 to slave mode, in MC-808 you must change MIDI OUT settings for the all tracks (channels) SHIFT + PAD 13 (part parameters, and move cursor to SEQ OUTPUT ASSIGN) all tracks you must change to INT (internal) now MC-808 play only the internal tone generator without send anything to MC-505 Remember to save the pattern with new settings, because after power off, track parameters set to default ..
If you want play a tempo sync and send some notes from MC-808 to MC-505. Once again you must change settings in tracks, for which you want transmit to MC-505, so press SHIFT + PAD 13 (set to EXT external, now you can play notes from MC-808 but hear sounds only from MC-505, also you can set to BOOTH and play notes and hear sound from booth grooveboxes at the same time...)
I haven't tried this yet, but I'm sure this is what I needed.
Thanks for help anyways.
Re: MC-808 as master, but sync only...
:face palm: not sure why I bothered.