Hello everyone,
I am afraid there is no solution to this problem and someone might have already presented this issue however I'll go ahead and ask.
My setup is the following:
Laptop with traktor software + MC-808 + Pulse 2 (desktop module)
Traktor generates the midi clock and sends it to the MC-808 which is in slave mode in order to lock to the clock during the set. The MC-808 is also used as a controller for the pulse2 synth and here comes the problem:
- the Pulse 2 has an internal arpeggiator, which requires a clock in order to run (internal or external). However the MC-808 sends no clock when in SLAVE mode making the pulse arpeggiator unlocked to the set and it requires me to use the MC-808 arpeggiator which is way less controllable.
Any solution?
Thank you,
Cheers
MC-808 as slave but sending the clock to Pulse 2
-
- Posts: 1
- Joined: 19:05, 7 January 2017
Re: MC-808 as slave but sending the clock to Pulse 2
Have you tried midi thru or remote instead of slave??
-
- Posts: 39
- Joined: 00:46, 17 March 2014
Re: MC-808 as slave but sending the clock to Pulse 2
Midi mergers and splitters could be a solution. Like Kenton MIDI Thru 5 and Kenton Midi Merge. There are other companies as well, of course.