Bricked My Edirol V4 Video Mixer

Everything else from Roland that doesn't fit elsewhere
Post Reply
JamesE
Posts: 2
Joined: 16:11, 29 October 2016

Bricked My Edirol V4 Video Mixer

Post by JamesE »

Hi All,

I bricked my Edirol V4 so now when I turn on it gives me ER00 on the LED screen.

How it got bricked is that I pressed 3 buttons then turned on the power to view the hidden Midi menu.

Any direction anyone can offer....Ie....power+button combination, SysEx dump file back to unit, jump up and down 3 times!

Any direction would be appreciated. Thanks

Cheers
James
User avatar
JUKE179r
Posts: 116
Joined: 11:08, 12 February 2010
Location: Suffolk, UK (Chicago Native)
Contact:

Re: Bricked My Edirol V4 Video Mixer

Post by JUKE179r »

Check out page 29 of the manual to do a Factory Reset ... BUT... it erases all settings :

Restoring the Original Factory Default Settings (Factory Reset):
You can return the content of the settings to their original status at the time the V-44SW shipped from the factory.
Try running Factory Reset when the V-44SW functions differently than described in the Owner's Manual, even though you've carried out the procedures according to the instructions.
• When Factory Reset is executed, except for the two parameters below, the content of all settings made up to that point is lost when Factory Reset is executed.
* The current settings for the two "8. System" parameters "1: System Frame Rate" and "12: V-440HD Slave Mode" remain unchanged.

Restoring All Settings to the Original Factory Default Setting:
1 Press the [MENU] button to display the Main menu.
2 Select "10. Factory Reset."
3 The message "Are You Sure?" appears; select "Yes."
4 Press the [ENTER] button. This executes Factory Reset.

Restoring the Original Factory Default Settings in Individual Sub-Menus:
You can also execute Factory Reset for individual sub-menus.
To do this, select the "Reset" option from within the sub-menu.
The following describes an example with instructions for Factory Reset with the "1. Output" sub-menu.
1 Press the [MENU] button to display the Main menu.
2 Select "1. Output" and select "15: Output Reset" from the sub-menu.
3 Select "Yes."
4 Press the [ENTER] button. This executes Factory Reset for the "1. Output" sub-menu.
JamesE
Posts: 2
Joined: 16:11, 29 October 2016

Re: Bricked My Edirol V4 Video Mixer

Post by JamesE »

Thanks appreciate that but that is not my unit. I am very OLD school. This is my product.

https://www.google.ca/search?q=edirol+v ... oQ_AUIBigB

Roland got a hold of me today and hopefully they have a solution.
avuri11
Posts: 1
Joined: 18:42, 23 May 2023

Re: Bricked My Edirol V4 Video Mixer

Post by avuri11 »

Hey I know its been awhile but any chance you find a solution to your bricked V4 I'm having the same issue with my V4 an Error pops up on the little Screen E00
Post Reply