Hi All,
I bricked my Edirol V4 so now when I turn on it gives me ER00 on the LED screen.
How it got bricked is that I pressed 3 buttons then turned on the power to view the hidden Midi menu.
Any direction anyone can offer....Ie....power+button combination, SysEx dump file back to unit, jump up and down 3 times!
Any direction would be appreciated. Thanks
Cheers
James
Bricked My Edirol V4 Video Mixer
Re: Bricked My Edirol V4 Video Mixer
Check out page 29 of the manual to do a Factory Reset ... BUT... it erases all settings :
Restoring the Original Factory Default Settings (Factory Reset):
You can return the content of the settings to their original status at the time the V-44SW shipped from the factory.
Try running Factory Reset when the V-44SW functions differently than described in the Owner's Manual, even though you've carried out the procedures according to the instructions.
• When Factory Reset is executed, except for the two parameters below, the content of all settings made up to that point is lost when Factory Reset is executed.
* The current settings for the two "8. System" parameters "1: System Frame Rate" and "12: V-440HD Slave Mode" remain unchanged.
Restoring All Settings to the Original Factory Default Setting:
1 Press the [MENU] button to display the Main menu.
2 Select "10. Factory Reset."
3 The message "Are You Sure?" appears; select "Yes."
4 Press the [ENTER] button. This executes Factory Reset.
Restoring the Original Factory Default Settings in Individual Sub-Menus:
You can also execute Factory Reset for individual sub-menus.
To do this, select the "Reset" option from within the sub-menu.
The following describes an example with instructions for Factory Reset with the "1. Output" sub-menu.
1 Press the [MENU] button to display the Main menu.
2 Select "1. Output" and select "15: Output Reset" from the sub-menu.
3 Select "Yes."
4 Press the [ENTER] button. This executes Factory Reset for the "1. Output" sub-menu.
Restoring the Original Factory Default Settings (Factory Reset):
You can return the content of the settings to their original status at the time the V-44SW shipped from the factory.
Try running Factory Reset when the V-44SW functions differently than described in the Owner's Manual, even though you've carried out the procedures according to the instructions.
• When Factory Reset is executed, except for the two parameters below, the content of all settings made up to that point is lost when Factory Reset is executed.
* The current settings for the two "8. System" parameters "1: System Frame Rate" and "12: V-440HD Slave Mode" remain unchanged.
Restoring All Settings to the Original Factory Default Setting:
1 Press the [MENU] button to display the Main menu.
2 Select "10. Factory Reset."
3 The message "Are You Sure?" appears; select "Yes."
4 Press the [ENTER] button. This executes Factory Reset.
Restoring the Original Factory Default Settings in Individual Sub-Menus:
You can also execute Factory Reset for individual sub-menus.
To do this, select the "Reset" option from within the sub-menu.
The following describes an example with instructions for Factory Reset with the "1. Output" sub-menu.
1 Press the [MENU] button to display the Main menu.
2 Select "1. Output" and select "15: Output Reset" from the sub-menu.
3 Select "Yes."
4 Press the [ENTER] button. This executes Factory Reset for the "1. Output" sub-menu.
Re: Bricked My Edirol V4 Video Mixer
Thanks appreciate that but that is not my unit. I am very OLD school. This is my product.
https://www.google.ca/search?q=edirol+v ... oQ_AUIBigB
Roland got a hold of me today and hopefully they have a solution.
https://www.google.ca/search?q=edirol+v ... oQ_AUIBigB
Roland got a hold of me today and hopefully they have a solution.
Re: Bricked My Edirol V4 Video Mixer
Hey I know its been awhile but any chance you find a solution to your bricked V4 I'm having the same issue with my V4 an Error pops up on the little Screen E00