vs-2400 analog audio output sound quality concerns

Multitrack recorders, controllers, and other studio equipment
Post Reply
petenkimmie
Posts: 13
Joined: 12:20, 22 September 2007
Location: ohio

vs-2400 analog audio output sound quality concerns

Post by petenkimmie »

Hello group, Here's my question/concern.
I am running a vs2400 w/ ds-8's linked optically. Also using Akg-240 phones. The playback or live monitoring is great with those two. My problem is I wanted to add my jbl bins and horns and have that for play back/monitor in the other half of my basement studio for reference on mastering in a larger room atmosphere.
I have used the analog outputs (7 & 8) direct to my crown amp, then direct to the bins. The sound is very lo/fi on all types of recorded and prerecorded c/ds and off the hard disk. I then have to turn on the effects (031) eq patch to readjust alot to make it acceptable. I mean this sound is nowhere close to the monitors or phones!!
Do I have a routing concern or do I need to add an external eq. in line w/ the jbl's. ? Thanks, Pete
Post Reply