Volume control for outputs 3/4, 5/6 in Octacapture

Multitrack recorders, controllers, and other studio equipment
Post Reply
projectaspen
Posts: 11
Joined: 23:13, 22 April 2016

Volume control for outputs 3/4, 5/6 in Octacapture

Post by projectaspen »

So, I'd like to use another set of speakers with a second amplifier in addition to Main Outs 1/2. I read the Octacapture manual, set Mix A to outputs 3/4, 5/6, tried both, but realize the "Main out" knob only controls the volume for outputs 1/2. I tried editing mixer settings in the software but wasn't able to decrease volume on outs 3/4 or 5/6 (or any other besides 1/2 for that matter).

On the interface panel, when music is playing, the mixer shows the output coming out of the 6 selected channels, but when I press Mix Sel it allows me to change volume for Mix A channels but that doesn't affect output.

So I was wondering what's the correct way for adjusting volume on multiple monitor setups with only one source selected (Mix A, or the sound coming from my computer).

Any help is appreciated,

thanks
projectaspen
Posts: 11
Joined: 23:13, 22 April 2016

Re: Volume control for outputs 3/4, 5/6 in Octacapture

Post by projectaspen »

Solved, just got assign other mixers to 3/4 or 5/6 (as in B or C mixers)

https://www.gearslutz.com/board/music-c ... ntrol.html
Post Reply