useing a juno-g as external sound source for SH-201

Forum for SH-201
Post Reply
netwreck
Posts: 3
Joined: 04:14, 9 June 2007

useing a juno-g as external sound source for SH-201

Post by netwreck »

hi every one, new here

I'd like to use my Juno-G as an external sound source for a SH-201 would it be possible to go straight from the juno-g to the sh 201 or would the signal have to be amplified first? all so there’s the issue of going from ¼ inch out puts to RCA in. I was thinking about using a small mixer to convert the signal to RCA, plus it would allow me to use more then one sound source into the sh-201. Has any one tried this if so what kind of mixer would you recommend?

Thanks
netwreck
User avatar
Artemiy
Site Admin
Posts: 19754
Joined: 13:00, 17 April 2003
Location: Ukraine
Contact:

Re: useing a juno-g as external sound source for SH-201

Post by Artemiy »

You can simply do this with a stereo 1/4 jack to RCA cable. As of routing several sources, yes, you'll need a mixer - just get the one you can afford (there are many small/affordable 6-8 channel mixers out there).
Post Reply