Dual/Split Problem

Forum for SH-201
Post Reply
richpace
Posts: 5
Joined: 01:05, 8 November 2008

Dual/Split Problem

Post by richpace »

When I press the Dual/Split button so it is flashing, I still
hear both patches regardless of where I am on the keyboard,
although when I play the upper or lower sound alone, they sound like the two different patches I have programmed. Can anyone help?
Jpk1962
Posts: 2
Joined: 16:43, 9 August 2011

Re: Dual/Split Problem

Post by Jpk1962 »

I have the same problem. I would like the left side to play for example an arpeggio and the right side to play a lead or pad. I have read Wælker that you Can make this adjustment by using Editor.

Best of luck with it. Hope someone can help.
Re-Member
Posts: 114
Joined: 02:11, 4 June 2007
Location: Portland, OR

Re: Dual/Split Problem

Post by Re-Member »

By default, the arpeggio settings get used on both the lower and upper tone even if the patch is set to split. Kind of annoying, but you need the editor to switch the arp to a single layer. My advice is go to PRESET D8, set the arp to which side you use it the most with the editor, then save it to USER D8. Keep that patch saved so you always have that setting easy to get to.
Post Reply