The input sounds distorted

Forum for SonicCell
Post Reply
Noteman
Posts: 88
Joined: 01:50, 31 December 2007

The input sounds distorted

Post by Noteman »

Ok, so I have a little problem, I often use my other synths through the Sonic Cell's input.

Problem is it sounds a lot different than the original signal (sounds "Boxy"), and there is also distortion. I am wondering whats up with this.

A) The signal is NOT too hot.

B) It is going to output only, so no effect could cause this.


Any ideas?
User avatar
Artemiy
Site Admin
Posts: 19754
Joined: 13:00, 17 April 2003
Location: Ukraine
Contact:

Re: The input sounds distorted

Post by Artemiy »

It can be a cable that has a bad contact or fits badly into the input jacks.
Noteman
Posts: 88
Joined: 01:50, 31 December 2007

Re: The input sounds distorted

Post by Noteman »

I just swapped the cable no difference... BUT

I am not sure if I am connecting it properly. I use the XLR jack (with normal 1/4" cable), I guess I should be using the INPUT though. BUT there is no sound when I use the INPUT, even if I switch the "slider" to input.

Anyway thanks for your help artemiy.
Post Reply