routing USB audio output to MFX-3

Forum for SonicCell

routing USB audio output to MFX-3

Postby sylv1 » 13:58, 3 February 2011

Hi all,

Sonic Cell enables routing USB audio output to MFX-3 (through input FX), but unfortunately it seems that we can not prevent MFX-3 output from being routed back to USB audio input, causing a feedback loop...

What I want to do is :
input (e.g. guitar) -> Computer in -> software FX -> Computer out
-> input FX -> MFX-3 -> output

What I currently have is :
input (e.g. guitar) -> Computer in -> software FX -> Computer out
-> input FX -> MFX-3 -> output + Computer in -> software FX -> etc...

Any idea to avoid getting this feedback loop?
Maybe by setting a volume to 0 somewhere ?
sylv1
 
Posts: 2
Joined: 13:52, 3 February 2011


Re: routing USB audio output to MFX-3

Postby rcraven » 01:15, 4 February 2011

I assume you are in Patch mode
On the editor PATCH EFFECTS /Routing
Bottom right is a switch marked 'Computer' I take it it is in the 'Input Effect' position ?

Royce
rcraven
 
Posts: 521
Joined: 14:36, 9 September 2007
Location: Melbourne Australia

Re: routing USB audio output to MFX-3

Postby sylv1 » 21:16, 4 February 2011

Hi Royce,

Thanks for your answer.

Yes, my "To computer" switch is in the "Input FX" position instead of MIX.
This position prevents the output of the "master FX" to go to the computer, but the output of MFX-3 (behind inpux FX) is still connected to both output and the computer.

Is there any way to remove this connection between MFX-3 and the computer, without removing the connection between the external input and the computer ?

Sylvain
sylv1
 
Posts: 2
Joined: 13:52, 3 February 2011


Return to SonicCell

Who is online

Users browsing this forum: No registered users and 1 guest