Soniccell's Win 8 driver

Forum for SonicCell

Soniccell's Win 8 driver

Postby vmeriau » 16:15, 12 November 2012

Hi everybody !

Here is a bad news : soniccell is not recognized under Windows 8 64bits.
I don't know if Roland will do something.

If someone knows what to do, tell us ;-)
vmeriau
 
Posts: 6
Joined: 23:42, 13 November 2007


Re: Soniccell's Win 8 driver

Postby vmeriau » 16:52, 12 November 2012

I've found a solution, here, in this forum:
http://forums.rolandclan.com/viewtopic.php?f=12&t=45796&p=263247&hilit=windows+8#p263247
http://laslow.net/2012/03/14/disable-driver-signature-enforcement-in-windows-8/
ETA: SUCCESS!

I did as the above post suggested using bcdedit to disable checking of the driver installation signature and it worked.

- In a command prompt (or powershell) running as administrator...

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON

- reboot
- Install the driver by right-clicking the .INF and selection 'Install'
- Allow the driver to install despite being unsigned
- Again in a command prompt (or powershell) running as administrator

bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF

- reboot

Hope this helps,
Bill
vmeriau
 
Posts: 6
Joined: 23:42, 13 November 2007

Re: Soniccell's Win 8 driver

Postby vmeriau » 10:42, 13 November 2012

It works !
vmeriau
 
Posts: 6
Joined: 23:42, 13 November 2007

Re: Soniccell's Win 8 driver

Postby STEPH » 10:55, 24 December 2012

Hi Guys,

I am a french user of the sonic cell and I tried to install it on a new PC with Windows 8 64 bits.

I used the WIndows 7 64bits driver dowloaded from Roland website but I failed.
Then I run solve compatibility problem, and it sart installing but do not install teh driver properlly. SO it is not working.

Then I found your post using prompt command in admin mode and did it exactly how you suggested.

I went in files/and installed the .inf driver, it installed directly without asking about signature, and then when I connect my sonic cell teh driver is not working properly.

I was wondering if someone could send me the drvier you used in order to be sure that I use the right driver.

I can send my email
Thank you for your help!!
STEPH
 
Posts: 1
Joined: 10:49, 24 December 2012


Return to SonicCell

Who is online

Users browsing this forum: No registered users and 2 guests