SonicCell OUTPUT GAIN

Forum for SonicCell
Post Reply
nnyerges
Posts: 12
Joined: 00:36, 27 May 2009

SonicCell OUTPUT GAIN

Post by nnyerges »

Hi all,

Maybe is a stupid question, but since I bought it many years ago, every time I turn on the device, the "Output Gain" MENU / SYSTEM, is always in +12 DB. No matter how you change it and record it, always starts at +12 dB. No way to be saved once and for all?

Reagards,
Nicolas
howardS
Posts: 1759
Joined: 03:22, 10 March 2006
Location: Toronto, Canada

Re: SonicCell OUTPUT GAIN

Post by howardS »

Have you done a system write or did you just change the parameter without saving it?
rcraven
Posts: 629
Joined: 14:36, 9 September 2007
Location: Melbourne Australia

Re: SonicCell OUTPUT GAIN

Post by rcraven »

After you change the value and you exit the System menu there is a Write button to the left.
User avatar
PauloF
Posts: 4201
Joined: 02:35, 16 January 2006
Location: Lisbon, Portugal
Contact:

Re: SonicCell OUTPUT GAIN

Post by PauloF »

rcraven wrote:After you change the value and you exit the System menu there is a Write button to the left.
Exactly like HowardS and rcraven said.
The Output Gain is one of the System parameters and can be easily saved pressing the WRITE button in System Menu.
howardS
Posts: 1759
Joined: 03:22, 10 March 2006
Location: Toronto, Canada

Re: SonicCell OUTPUT GAIN

Post by howardS »

If that button says patch write instead of system write then you just need to get out of patch mode and then it should say system write.
Post Reply