Cannot use my RD700GX as slave

Forum for RD-700GX, RD-700NX and RD-800
howardS
Posts: 1759
Joined: 03:22, 10 March 2006
Location: Toronto, Canada

Re: Cannot use my RD700GX as slave

Post by howardS »

Hi back from here in Canada and welcome to the Roland Clan. I just re-read your post, Rey Roland, and see that you asked if changing the system setting to PartMulti would work. I dont see that option, it is 16PART or 16PART+PERFORMANCE. So if you want the external parts to match the 4 layers on the RD then I think you need to set this to 16PART. What us yours currently set to?
tabatha81
Posts: 4
Joined: 10:29, 20 August 2013

Re: Cannot use my RD700GX as slave

Post by tabatha81 »

Guys, i couldn't do it... :-(
tabatha81
Posts: 4
Joined: 10:29, 20 August 2013

Re: Cannot use my RD700GX as slave

Post by tabatha81 »

Solved!!!
Edit/01.System/Part mode/ choose "16 part" (NOT 16 +perf)

Thaks so much guys!!
howardS
Posts: 1759
Joined: 03:22, 10 March 2006
Location: Toronto, Canada

Re: Cannot use my RD700GX as slave

Post by howardS »

Oh great. Glad it worked for you.
howardS
Posts: 1759
Joined: 03:22, 10 March 2006
Location: Toronto, Canada

Re: Cannot use my RD700GX as slave

Post by howardS »

I just came across this post in the knowledge base on the Roland Canada site. It gives a step by step guide on setting this up on the RD-700nx so I thought I would post it here for others coming across this thread.
Post Reply