Cannot use my RD700GX as slave
Re: Cannot use my RD700GX as slave
Hi back from here in Canada and welcome to the Roland Clan. I just re-read your post, Rey Roland, and see that you asked if changing the system setting to PartMulti would work. I dont see that option, it is 16PART or 16PART+PERFORMANCE. So if you want the external parts to match the 4 layers on the RD then I think you need to set this to 16PART. What us yours currently set to?
Re: Cannot use my RD700GX as slave
Guys, i couldn't do it... :-(
Re: Cannot use my RD700GX as slave
Solved!!!
Edit/01.System/Part mode/ choose "16 part" (NOT 16 +perf)
Thaks so much guys!!
Edit/01.System/Part mode/ choose "16 part" (NOT 16 +perf)
Thaks so much guys!!
Re: Cannot use my RD700GX as slave
Oh great. Glad it worked for you.
Re: Cannot use my RD700GX as slave
I just came across this post in the knowledge base on the Roland Canada site. It gives a step by step guide on setting this up on the RD-700nx so I thought I would post it here for others coming across this thread.