I wonder if anyone knows if it is possible to adjust the Rd700NX's pedal sensitivity? I have an RPU-3 and I find that when I rest my foot on the pedal very lightly it gives sustain. What I would like is to be able to rest my foot on the pedal lightly without making sustain, then press it gradually to obtain sustain.
In short it seems too sensitive?
Z
Pedal adjustment RD700NX
Re: Pedal adjustment RD700NX
On the DP10 there is a switch to toggle between 'continuous' and 'switch' modes.
If the RPU-3 has the same, change it to 'switch' mode, although you will lose the half peddling feature (which brings the dampers further away from the strings the more you press it when in 'continuous' mode).
AFAIK, there are no internal adjustments on the RD-700NX to alter the sensitivity.
If the RPU-3 has the same, change it to 'switch' mode, although you will lose the half peddling feature (which brings the dampers further away from the strings the more you press it when in 'continuous' mode).
AFAIK, there are no internal adjustments on the RD-700NX to alter the sensitivity.