controlling things inside a Studio set not working?

Forum for Fantom-G6/7/8
Post Reply
0kk0p3kk4
Posts: 152
Joined: 07:53, 7 May 2014

controlling things inside a Studio set not working?

Post by 0kk0p3kk4 »

Hi,

I noticed some things that I cant figure out,

1) mfx control
I have a hammond sound that has distortion as pxf, and when I put rotary as mxf, I dont find a way to control the rotary speed via foot control or anything, is this possible? (only way atm is to keep mfx open and change it straight from the "source")

2) Sustain cut
If I have sustain pedal pressed down (strings on part 1), and change part from 1 to 2 (piano sound) via pads (13 part change) or pedal (panel inc) , the sound is cut off? This is weird, since it works straight-out-of-the-box on FA-06 for example. Or like if I have a sound module and a controller and change midi-channels, the sustain remains.

If I keep my hand on the keys and press pads to change the part, then the sound is not cut.

Whats the deal here, am I misunderstanding something?
jabberwocky
Posts: 621
Joined: 15:55, 30 March 2004

Re: controlling things inside a Studio set not working?

Post by jabberwocky »

As I understand it

1) only PFX control dirtectly available. Or put Rotary as a PFX and distortion as MFX , or second option :
you can record any parameter changes to a phrase with the fantom.
So, record in 1 phrase slow -> fast and in the second phrase fast to slow.
Assign these prahes to the PADS and control the MFX by this.

2) a. change between livesets ?
b. record keyboard range changes for part 1 and 2 in two different phrases.
Assign the phrases to the pads with rps , + make sure keyboard swithces are on for the parts.
Post Reply