Page 1 of 1

The Integra and the Fantom.

Posted: 16:01, 6 July 2017
by BlackMaskAttacks
Just bought the Integra 7. I have connect it to my Fantom. The midi between the two synths works find. For the moment I got the audio cables from both synths connected to a mixer table and out to my monitors. Everything works find.
The problem is when I listen to my headphones connected in to my Fantom. I cant hear the sound from my Integra there, only the Fantoms sound.
How do I connect the audio cables so that I can hear both synths in the headphones.

Re: The Integra and the Fantom.

Posted: 02:03, 8 July 2017
by Saxifraga
I use the SPDIF out from Integra and route it to SPDIF In of my Fantom. Set Input to digital and voila!
But you need a converter from toslink cable to coax between both machines. Costs about 40..50€ here in Germany.
https://www.thomann.de/de/lindy_audioko ... r_264872_0

Re: The Integra and the Fantom.

Posted: 10:04, 11 July 2017
by BlackMaskAttacks
OK. So I am using the digital audio? I´m not the most technical person in this world but isn´t the easiast way to buy a coaxial cable. The digital audio output on the Integra and the input on the Fantom are for a coaxial cable?
Or am I´m missing something here?

Re: The Integra and the Fantom.

Posted: 16:37, 11 July 2017
by BlackMaskAttacks
Just bought an coaxial cable and it works fine. Thanks for the help..

Re: The Integra and the Fantom.

Posted: 07:57, 19 October 2017
by rayshek
You can Connect Integra-7 S/PDIF OUT -----> Fantom G S/PDIF IN
Then Holding Shift and push MIXIN Botton then Choose Digital,
Push MIXIN LED light, Switch to Studio mode choose External 16 Tracks.
you will hear integra-7 from your Fantom.