Fantom X6 Fatal error, no program in Rom
Fantom X6 Fatal error, no program in Rom
Hi,
I have a problem with my Fantom X6. Its shows below message
"Fatal error, no program in Rom, call roland service or local dealer"!
Could some one help me to solve this problem.
Regards
Stanly
I have a problem with my Fantom X6. Its shows below message
"Fatal error, no program in Rom, call roland service or local dealer"!
Could some one help me to solve this problem.
Regards
Stanly
Re: Fantom X6 Fatal error, no program in Rom
If you have any SRX expansion cards, RAM expansion or Compact Flash card/boards inserted, try reseating them or even better removing them. If that doesn't help I think you'll need to do what the message says: call your Roland dealer to have it serviced.
Re: Fantom X6 Fatal error, no program in Rom
It sounds like the firmware is corrupt or incomplete - did this happen after an update? I think the unit is saying that it can't find an operating system in the ROM from where it is loaded.
Re: Fantom X6 Fatal error, no program in Rom
It did not happen after an update. The device has been not use for 8 months time. When I restart it and found this problem.
Re: Fantom X6 Fatal error, no program in Rom
Can any one advice me HOW CAN I LOAD OS INTO ROM.
Re: Fantom X6 Fatal error, no program in Rom
No idea, man. I'd seriously get in touch with your local Roland office.
Re: Fantom X6 Fatal error, no program in Rom
ROM stands for "Read Only Memory". You will not be able to write or reload to this memory space. If you haven't done so already, do as suggested and remove any SRX cards, memory expansion, or compact flash cards and reboot. Any of these can corrupt the bootup process if they are defective.
"Fatal Error" in this case my indeed mean just that. Call your Roland support folks and see what they have to say. Good luck!
"Fatal Error" in this case my indeed mean just that. Call your Roland support folks and see what they have to say. Good luck!
Re: Fantom X6 Fatal error, no program in Rom
It may say 'ROM' on the error message but it's flash ROM which can be and is written to and reloaded during an OS update for example.
-
- Posts: 49
- Joined: 16:42, 4 May 2010
- Location: Algeria
Re: Fantom X6 Fatal error, no program in Rom
Well if the Fantom X have an "internal battery" change it i had same kinda problem with my Technics KN few times ago i changed the internal battery it worked great after that good luck
Fantom X6 Main Board Partnumber
Please help me to have the Fantom X6 Main Board Partnumber.
Can I buy it From Singapore
Can I buy it From Singapore
Re: Fantom X6 Fatal error, no program in Rom
I had the same problem with my X7. The motherboard needs replaced and can only be done by a Roland service center. Mine had to be shipped to California and returned. Take your keyboard to an authorized service center.
It only cost me $130 US to be fixed.
It only cost me $130 US to be fixed.