Fantom XR V. 2 upgrade kit needed

Forum for Fantom-S/S88, Fantom-X6/7/8, Fantom-XR and Fantom-Xa
Post Reply
dblock
Posts: 3
Joined: 02:22, 2 June 2013

Fantom XR V. 2 upgrade kit needed

Post by dblock »

Hello,
Tried every possible way of getting this upgrade kit (FAN-XR-UP1), even calling Roland factory service to see if they would upgrade the OS, but no luck. I'll give this a try, if anyone still has the famous upgrade kit, I'd be happy to buy it or rent it, either way. Please let me know! Located in Florida, US.
Thanks!
dcesarblock@aol.com
mcoulter
Posts: 5
Joined: 03:45, 19 February 2016
Location: Melbourne, Australia

Re: Fantom XR V. 2 upgrade kit needed

Post by mcoulter »

you still after the upgrade??
After a LOT of searching and emails, phone calls I found an original FAN-XR-UP1 still in cling wrap, and was able to clone it, and upgrade mine from the clone.
Happy to share for a small fee to offset my legwork and time and effort.. either via dropbox (file is 122mb) or can post on a 64mb CF card - again payment to cover cost of time and materials and small gift to me :)
PM me if keen.
vsyn7425
Posts: 104
Joined: 12:07, 6 January 2017

Re: Fantom XR V. 2 upgrade kit needed

Post by vsyn7425 »

Hi mcoulter. I realise your post about the Fantom XR V2 upgrade kit is quite a few years old now but is the "clone" you created still available or could you possibly detail the way you cloned the original CF card because I believe it was copy protected.
Post Reply