Fantom X Aspect ratio Display Fault

Forum for Fantom-S/S88, Fantom-X6/7/8, Fantom-XR and Fantom-Xa
Post Reply
JCHutchinson
Posts: 1
Joined: 03:57, 27 March 2014

Fantom X Aspect ratio Display Fault

Post by JCHutchinson »

Hi all,

I had a cracked screen on my fantom x7 from an unfortunate fall (from waist height). I have replaced the screen but now everything is cut off on the right side and there is no colour (only black and white). Everything seems as though it has zoomed in. Does anyone know of any causes for this and any possible solutions??

I have attached a couple of pictures. Any information is valued.
Attachments
This is on startup
This is on startup
2014-03-26 20.50.57.jpg (1.68 MiB) Viewed 325 times
This is the Home page
This is the Home page
2014-03-26 20.51.34.jpg (2.01 MiB) Viewed 325 times
cminor
Posts: 319
Joined: 09:01, 15 July 2008
Location: Bucharest , Romania

Re: Fantom X Aspect ratio Display Fault

Post by cminor »

Maybe you didn't make the connection ok?
The data cable must be shorted somehow, not all the pins are connected??
Check the data cable, pin by pin, with a measure device.
Post Reply