Yamaha CP-80 samples for Fantom X7

Forum for Fantom-S/S88, Fantom-X6/7/8, Fantom-XR and Fantom-Xa

Yamaha CP-80 samples for Fantom X7

Postby Harvickfan4 » 18:28, 2 November 2015

Does anyone know where I can get a Yamaha CP-80 sample set for my fantom x7? Been searching all over and can only find samples in .GIG format and can't convert them without spending boatloads of money. I know There is already a sound similar called stage piano but the bottom end doesn't sound like it. I've messed with the .GIG sample on my PC but can't figure out how to convert it to a .wav file to transfer it to a PC Card. Please help!!!
Harvickfan4
 
Posts: 6
Joined: 17:47, 2 November 2015


Re: Yamaha CP-80 samples for Fantom X7

Postby Harvickfan4 » 00:20, 7 November 2015

Ok so I figured out how to convert the gig file to a wav and loaded the samples into my fantom. Now my problem is figuring out how to make a patch with all the samples that I have. There's about 128 samples at 4 different velocities. At several keys from each octave. Any one know how to do this?
Harvickfan4
 
Posts: 6
Joined: 17:47, 2 November 2015

Re: Yamaha CP-80 samples for Fantom X7

Postby CesarsoundOne » 01:51, 7 November 2015

You may try my CP70 samples for Fantom X. Here is the link:

https://www.dropbox.com/s/ym3hndu7po9qz ... 1.rar?dl=0

pass: jcr

Cesarsound
User avatar
CesarsoundOne
 
Posts: 161
Joined: 21:29, 9 October 2014

Re: Yamaha CP-80 samples for Fantom X7

Postby Harvickfan4 » 02:23, 7 November 2015

Sweet thank you! I've been looking for this sound for a while. I've had my Fantom x7since it came out but never tinkered with it until now. Only used what it came with sound wise and never really learned how to use it to its fullest potential and trying to figure it all out now. Its a very complicated machine.
Harvickfan4
 
Posts: 6
Joined: 17:47, 2 November 2015

Re: Yamaha CP-80 samples for Fantom X7

Postby MrTwan » 05:06, 20 April 2017

Cesarsound1,

Can you give again a link to download your CP70? Not the compilation that contains the B3. I would like the file that contains only the CP70 (filename: EPiano_CP70_FanX_Cesarsound_V1.rar)

Thanks!
MrTwan
 
Posts: 6
Joined: 06:15, 4 February 2011

Re: Yamaha CP-80 samples for Fantom X7

Postby MrTwan » 07:53, 23 April 2017

Or... someone else could give a download link?
MrTwan
 
Posts: 6
Joined: 06:15, 4 February 2011

Re: Yamaha CP-80 samples for Fantom X7

Postby gcoudert67 » 10:49, 23 April 2017

MrTwan wrote:Or... someone else could give a download link?


Let me see if I've got it.
gcoudert67
 
Posts: 188
Joined: 12:58, 19 August 2014
Location: Dunstable, UK

Re: Yamaha CP-80 samples for Fantom X7

Postby gcoudert67 » 12:00, 23 April 2017

gcoudert67 wrote:
MrTwan wrote:Or... someone else could give a download link?


Let me see if I've got it.


I don't seem to have it but I do have a few CP samples if you want them.
gcoudert67
 
Posts: 188
Joined: 12:58, 19 August 2014
Location: Dunstable, UK

Re: Yamaha CP-80 samples for Fantom X7

Postby MrTwan » 23:43, 23 April 2017

Are they ready to load in Roland Fantom X? (samples with .svd file)
MrTwan
 
Posts: 6
Joined: 06:15, 4 February 2011

Re: Yamaha CP-80 samples for Fantom X7

Postby gcoudert67 » 07:58, 24 April 2017

MrTwan wrote:Are they ready to load in Roland Fantom X? (samples with .svd file)


No, they're wavs, I'm afraid, so you'll have to create the multisample and patch but I can guide you through that. If there are any loop points, I can give you those too. Mind you, if I can find a spare CF card, I can create the .svq or whatever files myself and post that. I will try this afternoon.
I will look again at my HD because I am sure I downloaded Caesarsound's piano samples and not even that long ago.
gcoudert67
 
Posts: 188
Joined: 12:58, 19 August 2014
Location: Dunstable, UK

Re: Yamaha CP-80 samples for Fantom X7

Postby gcoudert67 » 15:46, 24 April 2017

OK, here's the link to the folder I have created. Probably not as good as Cesar's stuff but it'll get you started.
https://drive.google.com/file/d/0B2XfegOMS4PwcWZNc1E5R1lfUlk/view?usp=sharing
The file was compressed with 7-Zip; that's all I've got, sorry.
One of the multisamples is from a real CP70 (E-mu EIIIX library?) and the other is from my old Yamaha P150. I have created a few patches as well and adjusted the stereo panning and decay according to the note played. I have patched an EQ on all patches in case you wanted to change that. Lastly, I created the patches on my X7 (not my X8) so the octave setting might not be right but I'm sure you know how to change that.
gcoudert67
 
Posts: 188
Joined: 12:58, 19 August 2014
Location: Dunstable, UK

Re: Yamaha CP-80 samples for Fantom X7

Postby SteveT » 13:13, 2 July 2017

Oft disappointed by the lack of realism in the CP patches of many different brands of synth/piano (ironically Yamaha's being amongst the worst IMHO), I've recently settled for Roland's own waveforms. Despite the "stage piano" patches being.....er......hopeless, if you take the E.Grand waveforms in SRX07 (my favourite being 19) and apply them to a standard piano preset such as "UltimatGrand" you'll find something very useable, that you can tweak as you want from there. That said, I'm going to give the Cesarsound collection an outing, just in case I'm talking cobblers.
SteveT
 
Posts: 2
Joined: 11:42, 2 July 2017

Re: Yamaha CP-80 samples for Fantom X7

Postby gcoudert67 » 13:42, 2 July 2017

Thanks. I must give that a try.
gcoudert67
 
Posts: 188
Joined: 12:58, 19 August 2014
Location: Dunstable, UK

Re: Yamaha CP-80 samples for Fantom X7

Postby CesarsoundOne » 15:06, 2 July 2017

For those that missed it, here is a fresh link to download my CP70 library:

https://www.dropbox.com/s/d3xgxlbu0z4vs ... 1.rar?dl=0

pass: jcr

Cheers,
Cesarsound
User avatar
CesarsoundOne
 
Posts: 161
Joined: 21:29, 9 October 2014

Re: Yamaha CP-80 samples for Fantom X7

Postby LA Keys » 18:27, 2 July 2017

Thanks Cesarsound....

BUT this is for the Motif XS, not the Fantom X

LA
User avatar
LA Keys
 
Posts: 251
Joined: 05:59, 22 July 2014
Location: LA

Next

Return to Fantom-S and Fantom-X

Who is online

Users browsing this forum: Google [Bot] and 7 guests