technical challenge...

Forum for Fantom-S/S88, Fantom-X6/7/8, Fantom-XR and Fantom-Xa
Post Reply
gilligo
Posts: 1
Joined: 18:31, 21 February 2016

technical challenge...

Post by gilligo »

Hi folks, i have an odd question...i want to split the keyboard into two parts, namely...left side bass and right side drum kit. The question is that i want to be able to transpose the bass keys independently of the drums.. I have done this on the Korg Kronos and PA3X so it seems that it should be possible but im too dumb to figure it out by myself....PLEASE HELP!!!!!
fixxxer113
Posts: 23
Joined: 22:45, 1 November 2008
Location: Athens, Greece

Re: technical challenge...

Post by fixxxer113 »

Set up your split in performance mode. Then, go into "part view" and then "pitch". Among other settings, that screen will give you the option to set separate fine, coarse and octave transpose for each part.

You should download the Fantom-x manual from Roland's site if you haven't already. It will save you a lot of time finding all the stuff you can do with it (it's a lot!).

http://roland.com/support/article/?q=ma ... id=1811531
gcoudert67
Posts: 195
Joined: 12:58, 19 August 2014
Location: Dunstable, UK

Re: technical challenge...

Post by gcoudert67 »

It can be done in Patch mode as well. Key ranges for the split can be adjusted on the Patch Edit --> Pro Edit --> TMT tab and the pitch of each tone is set on the Pitch tab.
Post Reply