fantom fa-76 part change.

Forum for Fantom-S/S88, Fantom-X6/7/8, Fantom-XR and Fantom-Xa
Post Reply
0kk0p3kk4
Posts: 152
Joined: 07:53, 7 May 2014

fantom fa-76 part change.

Post by 0kk0p3kk4 »

Hi, could someone confirm if Multitimbre mode or Performance mode in fa-76 works like this;

1. You can put piano to part 1, strings to part 2 and organ to part 3 combined with part 16 (maybe with putting the part 16 midi channel to 3)
2. and then as you would play part 1 and sustain a chord, you can switch with a button press and move smoothly (not cutting the piano sound/effect in anyway) to part 2 to play strings and releasing the piano part 1. Also then repeating same idea, move from part 2 to part 3 ?

Of course the sounds could be whatever, but just the idea?

Also, sorry if this goes to wrong forum, wasnt quite sure where :)
gcoudert67
Posts: 195
Joined: 12:58, 19 August 2014
Location: Dunstable, UK

Re: fantom fa-76 part change.

Post by gcoudert67 »

For this type of sound switching, your best bet is to use RPS. But even then, you will only achieve a smooth transition if all the sounds use the same effects. Somebody please correct me if I'm wrong.
There is a good turorial on this on YouTube; it's done on a Fantom X but the principle is the same on all models.
https://youtu.be/e6JPInqO4jw
Post Reply