What parameters do I change on the MKS20EnsemEP (PR-A:F-08) or the SA Stacks (PR-A:026) to take off the effects to just leave a flat sound? I'm trying to get the original MKS-20 sound. I'm actually trying to arrive at the MKS-20 sound at 0:44 on this Keyscape video.
https://www.youtube.com/watch?v=Xg2f2aEmKa8
Thanks.
MKS-20 sound
-
- Posts: 195
- Joined: 12:58, 19 August 2014
- Location: Dunstable, UK
Re: MKS-20 sound
Press the Effects button and turn off every effect (change them all to 0).
Re: MKS-20 sound
I already had done that within the patch edit but that didn't solve it. I found the menu that will work.
Re: MKS-20 sound
Let me ask this. How do I add a new MFX effect? On some of my performances only MFX-1 will work. On others, all three will work. I want to add another. Any help?
Re: MKS-20 sound
Well, after a little investigation I figured it out. Change the MFX Struct.
Re: MKS-20 sound
Well, I have the best MKS-20 sound I can make but it just doesn't sound like the original. I figured since it was a Roland voice originally I would have the parameters to re-create it. Any suggestions would be helpful.
Also....is there a way to save and write tempo changes into a rhythm pattern?
Also....is there a way to save and write tempo changes into a rhythm pattern?
Re: MKS-20 sound
I spoke too soon.....figured out how to change and save tempo.
-
- Posts: 195
- Joined: 12:58, 19 August 2014
- Location: Dunstable, UK
Re: MKS-20 sound
Start with a piano / EP patch and replace its samples with the MKS-20 ones. You'll need to add effects too; default reverb and chorus settings should do the trick.