Fantom X Save Perfornance data to Patterns and Sys Ex Dumps

Forum for Fantom-S/S88, Fantom-X6/7/8, Fantom-XR and Fantom-Xa
Post Reply
robertkoa
Posts: 11
Joined: 15:27, 17 February 2014

Fantom X Save Perfornance data to Patterns and Sys Ex Dumps

Post by robertkoa »

Does your Fantom X have a Write Command or a Save Command
for Current Performance ?
If so and You hit Record on a Pattern - will
the sys Ex including Current Performance be Recorded into that Pattern ?

Is there a Sys Ex Code for current performance ?

Roland used to recommend a few blank Measures at Song beginning for 'Set Up Data' recorded into the Sequencer .

How is this done on Fantom X ?
I used to use an XP 60 years ago for serious Production with an ASR 10 and
Mophatt Turbo.Still have the Turbo.

Thinking of doing some work with Fantom X ( same sequencer as XP 60 ) and Mophatt Turbo .

Question- I used to use the XP 60 as sequencer and Librarian for Mophatt by
Recording both Internal AND Mophatt Turbo Performance on vacant Patterns.

So Pattern 100 would be Mophatt Performance.
Pattern 99 would be alternate Mophatt Sounds that would play perfectly including the Arpeggiator and EFX.

Pattern 98 would be Performance for XP 60...
Pattern 97 would be alternate Performance for XP 60.

Hit the 4 bar Pattern and Configured Perfectly.

This also prevented 'losing' current performance in XP 60 WITHOUT reloading entire Song.

***1]IF I buy a Fantom X will I still be able to
Write Internal Performances with all EFX to Patterns ?

2] Can I send SYS EX dump from Mophatt Turbo while Recording a Pattern to save
THAT Performance to a Pattern. ?

Looks like Fantom X does not write full Performances to the sequencer by hitting
Record then 'write' or however I used to do this.

Remember some people would use a 4 bar Count In in Song Mode for System Setup on XP 60 ?( I did it on Patterns instead ).

Does Fantom X have this function ?

Thanks .

EDIT - I have not Purchased X6 yet but maybe you guys can check if there is

Micro > edit > Program Change > current performance .

In other words: is there a PC for Current Performance?

And for Recording ONLY SysEx data so I could hit Record on Pattern 99 and send a Sys Ex dump from Mophatt Turbo.

This enables X6 to be a Librarian for the other Module Mophatt which has tons of arpeggiators and Filters that Sync up..etc.
Post Reply