FAN-X-UP1 Kit
FAN-X-UP1 Kit
Hi guys, looking upgrade kit for x6, anybody got this ?
Location: Poland, Europe
Best regards
Mario
Location: Poland, Europe
Best regards
Mario
Re: FAN-X-UP1 Kit
Same here if anybody has this kit I'd be glad to use it, it probably needs an image to restore on a flash card to be useable but it is worth the 10 minutes of work please anyone use rufus and make us an image backup:
Roland does not have it anymore and it does not sell anymore either.
See:
https://rufus.ie/
Roland does not have it anymore and it does not sell anymore either.
See:
https://rufus.ie/
-
- Posts: 101
- Joined: 06:18, 20 January 2013
Re: FAN-X-UP1 Kit
I will give a try.
I think I have it.
it's a 32mb flash that has some fan2.bin on it.
I think I have it.
it's a 32mb flash that has some fan2.bin on it.
-
- Posts: 101
- Joined: 06:18, 20 January 2013
Re: FAN-X-UP1 Kit
This a image made with rufus.
I hope it works.
I hope it works.
- Attachments
-
- FANX CARD.rar
- (11.49 MiB) Downloaded 361 times
Re: FAN-X-UP1 Kit
No one?
I have one X7 with the update.....but I thought....Works it with a X6/7/8 without the update??
Rob
I have one X7 with the update.....but I thought....Works it with a X6/7/8 without the update??
Rob
Re: FAN-X-UP1 Kit
Hi guys,
Has anyone successfully used the files above to update their Fantom X(6)-series?
If so, any tips for what flash card to use or anything to note?
Thanks!
Has anyone successfully used the files above to update their Fantom X(6)-series?
If so, any tips for what flash card to use or anything to note?
Thanks!
Re: FAN-X-UP1 Kit
i try but it wont work :( any specifis what type of file system should it work ?
Re: FAN-X-UP1 Kit
Is this for Version 2.0 or 2.10?
Thanks
-
- Posts: 55
- Joined: 13:26, 22 March 2021
Re: FAN-X-UP1 Kit
Stupid question, and yes there are stupid questions, is this the same thing that Roland gives away on its website at https://www.roland.com/us/products/fantom-x8/downloads/
If it not the same thing, would someone mind posting what it is and why it is important?
Thanks in advance!
--BC
If it not the same thing, would someone mind posting what it is and why it is important?
Thanks in advance!
--BC
-
- Posts: 55
- Joined: 13:26, 22 March 2021
Re: FAN-X-UP1 Kit
Since it has been over a week, I am going to bump this and hope someone has an answer.
Re: FAN-X-UP1 Kit
If I remember correctly, the CF card upgraded the OS to v2.0 then Roland offered the v2.10 update for free.
The last version of the OS that you can upgrade to on a v1 Fantom-X is v1.07, available from the same page linked to above.
The issue was that the data couldn't be copied to any old CF card. Somehow, it seemed to be connected to the specific card people bought from Roland. I'm not sure if that was ever solved.
Anyone, please correct me if any of this is wrong. My X7 came loaded with v2.10 when I bought it.
The last version of the OS that you can upgrade to on a v1 Fantom-X is v1.07, available from the same page linked to above.
The issue was that the data couldn't be copied to any old CF card. Somehow, it seemed to be connected to the specific card people bought from Roland. I'm not sure if that was ever solved.
Anyone, please correct me if any of this is wrong. My X7 came loaded with v2.10 when I bought it.
-
- Posts: 55
- Joined: 13:26, 22 March 2021
Re: FAN-X-UP1 Kit
Thank you, Andy, for that clarification.
My X8 came from a professional studio in LA and was already at version 2.10 as well.
I am trying to figure out if there is a file that might be in danger of being lost and that I should throw up on an archive. And should I also find or write instructions as for the file use as well.
Best,
BC
My X8 came from a professional studio in LA and was already at version 2.10 as well.
I am trying to figure out if there is a file that might be in danger of being lost and that I should throw up on an archive. And should I also find or write instructions as for the file use as well.
Best,
BC
-
- Posts: 55
- Joined: 13:26, 22 March 2021
Re: FAN-X-UP1 Kit
That is interesting. If that is still an issue, I would like to take a look at it with my software development colleagues.
--BC
Re: FAN-X-UP1 Kit
Can you tell me if the VHD image you provided was from a CF card that was used to successfully perform an upgrade, or just the files it contained?
My X7 (v2.1) booted up with the dreaded "Fatal error. ROM program load error" message, and following this guide http://forums.rolandclan.com/viewtopic. ... 89#p327389, I was finally able to revive it, but alas to v1.07 version!
So I am now stuck in v1 land, unable to get to v2 again, which sucks.
Does anyone on this forum possess a Roland issued 'FAN-X-UP1' card, that can make a forensic image of it and share, or sell it to me? Please PM me!!
Re: FAN-X-UP1 Kit
Hello Folks,
I am also looking for this KIT, if anyone selling, please let me know.
I am in Hungary so it would be fine from not overseas.
Thanx in advance.
I am also looking for this KIT, if anyone selling, please let me know.
I am in Hungary so it would be fine from not overseas.
Thanx in advance.