I am new to the Stage. So far I like it but the menus and etc are kind of confusing to me.
I have read through the manual fairly extensively but not found how to do this.
I have made and saved a simple performance. I have an Organ patch for the right hand and brass section patch for the left. I want to adjust the volume on the left hand part louder, independent of the right hand part.
I don't want to edit the patch volume. I want to edit the split parameters so the left part is louder.
Is this possible? Seems like it should be but I can't seem to figure out how to do it.
Thanks in advance for any help
Adjust volume for split independantly
-
- Posts: 1
- Joined: 15:57, 17 May 2011
Re: Adjust volume for split independantly
Select the performance you want to work, press the edit button and then on the main display you'll see at right side of display "part view"
All of souds slipted will be there each one on a part channel. Select the part and look for the sound level.
Just that!
All of souds slipted will be there each one on a part channel. Select the part and look for the sound level.
Just that!