CC-7 CC-11?
-
- Posts: 167
- Joined: 08:11, 13 March 2008
- Location: Felicity, OH
CC-7 CC-11?
I think I might have posted this a long time ago, but is there a remote chance that Roland can fix the AX to do what the manual says it can do? ie, "Send CC commands out to a module". If I am missing something, I apologize for the anger, but man is this frustrating. I have no way of controlling volume with my CONTROLLER! Please Roland, listen to our needs. The Manual clearly states that it sends CC Messages. How do we do it? Firstlovedan
- SammyJames
- Posts: 1118
- Joined: 23:48, 18 April 2003
- Location: USA
- Contact:
Re: CC-7 CC-11?
Dan:
I don't doubt that there is a problem here, and since I don't own an AX anymore, I can't tell you with certainty that the issue is not with your product. However, some more detail might help both me and you.
I used to own an AX1, and then I got an AX7. Both were able to send both 7 and 11 messages using the data wheel, which is on the end of the left-most part of the headstock.
There was a menu on each of these that let you set the behavior of this physical controller. Additionally, I recall that the Mod lever could send either 1, 7, or 11 messages, although I can't confirm that.
I know that I definitely accomplished this, because I specifically recall having needed to use the knob to send messages to my MC-80. So, also check to make sure that the device that you are sending these messages to can accept them adequately.
Let us know how things work out.
- Sammy
I don't doubt that there is a problem here, and since I don't own an AX anymore, I can't tell you with certainty that the issue is not with your product. However, some more detail might help both me and you.
I used to own an AX1, and then I got an AX7. Both were able to send both 7 and 11 messages using the data wheel, which is on the end of the left-most part of the headstock.
There was a menu on each of these that let you set the behavior of this physical controller. Additionally, I recall that the Mod lever could send either 1, 7, or 11 messages, although I can't confirm that.
I know that I definitely accomplished this, because I specifically recall having needed to use the knob to send messages to my MC-80. So, also check to make sure that the device that you are sending these messages to can accept them adequately.
Let us know how things work out.
- Sammy
-
- Posts: 167
- Joined: 08:11, 13 March 2008
- Location: Felicity, OH
Re: CC-7 CC-11?
On the ax synth, there are two knobs not unlike me ax-7. But these control the internal sounds of the ax synth. The manual says it sends out cc7 on one knob and cc-11 on the other, but neither is true, and as far as I can tell, there is no way to turn it on. Anyway, I'm curious as to how Roland is going to respond to a problem that is at least a year old. Blessings, dan
Re: CC-7 CC-11?
I totally agree!. Very frustrating.
The AX is out now for more than 1 year, they sell the black sparkle version and no software update to fix this problem. Another thing is midi patching. I cannot understand why Roland cannot fix these things with an update, it´s basic midi issue not magic
Please Roland DO something !!!!!
SoulBe
The AX is out now for more than 1 year, they sell the black sparkle version and no software update to fix this problem. Another thing is midi patching. I cannot understand why Roland cannot fix these things with an update, it´s basic midi issue not magic
Please Roland DO something !!!!!
SoulBe
-
- Posts: 167
- Joined: 08:11, 13 March 2008
- Location: Felicity, OH
Re: CC-7 CC-11?
I am seriously thinking about buying an AX-7 off ebay. At least it sends midi CC, and the pitch ribbon is way more responsive.