Can someone upload a Memory Dump???

[RodrigoRodrigues]

I am having some problems which a factory reset will not solve (http://goo.gl/JGCw7), and I've seen other problems that we can put in the same category, like this one: http://goo.gl/saBJk

I believe restoring a bulk memory dump from a perfect unit might (and this is a complete shot in the dark) solve the problems, but I don't have access to other Ax-Synth...

Can someone upload one? I would really, really appreciate it.

I am talking about the dump in a midi sequencer using dec+inc+strings(6):

(1) Connect the AX-Synth’s MIDI OUT socket to the
sequencer’s MIDI IN socket.
You can also connect the AX-Synth’s USB port to a
USB port on your computer and use a sequencer program:
(2) Hold down the VARIATION [DEC÷–] + [INC÷+] + TONE
[6] (STRINGS/PAD) buttons and switch on the
AX-Synth.
The display now shows the “dMP” message and the
FAVORITE [A] and buttons flash.
(3) Start recording on your sequencer.
You may also have to activate its reception of SysEx
data. See the sequencer’s manual for details.
(4) Press the FAVORITE button on the AX-Synth to
start transmitting its settings.
The display now shows the “Snd” (sending) message
and the FAVORITE [WRITE] button flashes.
(5) Wait until “dNE” appears in the AX-Synth’s display
and the FAVORITE [WRITE] button goes dark, then
stop the sequencer.
(6) Save your “song” (or data file) on the sequencer/
computer.
(7) Switch the AX-Synth off, wait a moment, then
switch it back on again